Electrical Safety Tools

Electrical Safety Tools

122145
Voltage
Jaw opening
Diameter
Length
Size
Delivery time
Country of origin

Electrical safety tools for power transmission and distribution

Low Voltage LV Live working electrical safety tools: The new range of bimaterial insulated electrical safety tools for live working up to 1 000 Volts according to IEC 60900 standard. Each tool is controlled and tested to 10 000 volts. This ensured by strict quality control procedures. Complete range of insulated electrical safety tools for live working up to 1 000 Volts according to IEC 60900 standard. This ensured by strict quality control procedures. Maximum voltage use: 1000 V. Aluminium casting plier. To strip LV twisted cables. Aluminium casting plier. To strip LV cables. Chrome vanadium steel. Burnished head. Stainless steel blades. Softgrip handles. Adjustable screw joint. Non insulated tool Capacity: 8 to 54 Nm (ibF Ft: 5-40). Linear graduation, english and french scales (ibF Ft and Nm). Tolerance: 4%. For intervention works, strong waterproof, canvas reinforced bottom, large capacity of storage, shoulder strap. Black grained leather with handle. The interior includes: a pocket, a separation which forms a tool tray and a fold-down tool tray. For the most common operations, we propose all types of kits hand electrical safety tools. Insulated electrical safety tools must comply with the NF EN 60900 and IEC 60900 standards. To meet these standards, insulated electrical safety tools undergo 10 000 volts through electrical testing and many mechanical tests, including impact tests, tearing tests, and puncture tests. For working live at nominal voltage up to 1000 V AC and 1500 V DC. Insulated electrical safety tools. Products suitable for work on live cables, particularly low voltage (30 cm area of a live bare wire). Ergonomic. Dual material with injected material for operator comfort. Dielectric Test Indentation Flame retardancy Impact Test Test for adhesion of the insulating materiel Extensive product line for work on live cables; mainly used by LV Live Line Working teams. Ergonomic. Dual-layer with a white insulating layer. High mechanical strength in the layers due to dipping technique. Steel with high mechanical properties. Chrome – molybdenum vanadium steel blade. Dual material handle. Anti-slip material. Chrome-vanadium steel. Dual material handle. Chrome – molybdenum vanadium steel blade. Special steel, oil-hardened. Burnished head. Chrome-vanadium steel. Chrome-vanadium steel for pin terminals 2.8/5/6.35 mm. Composite insulation. Entirely insulating. Treated forged steel blade. Protected hard forged steel. Two blade positions. Flush and 90° cutting supplied. Tension blade by screw. Special steel, oil-hardened. Special steel insulated inserts using one-piece injection.

Electrical safety tools portfolio for power transmission and distribution systems

Screw tightening kit: tightening tool kit for screw with BTR head BTR. Ssix sides of 4. Suitable particularly for identically tightening connection circuit breakers, meters and various kits used by the ERDF for the equipment of the control panels. Electrical tool bag: Foamed structure and reinforced base. Adjustable shoulder strap. 8 outside pockets. Interior: mesh pocket and removable tool holder. 4 outside pockets and large compartment inside. Transport handles. Backpack for electrical safety tools: Semi-rigid and foamed structure. Reinforced handle. 4 exterior pockets. Velcro and straps for storage for insulating mat. Interior: pocket for a laptop, pockets, detachable reversible tray and elastic straps for electrical safety tools. Support pads and reinforced bottom. Delivered without electrical safety tools. Electrical safety tools box: Flexible and detachable protective flap for direct access to electrical safety tools. Metal up-and-over handle, with foam padding. 8 exterior pockets, including one adjustable pocket for a saw and 10 vertical internal pockets. Adjustable shoulder strap. Support pads and reinforced bottom. Delivered with tools. 2 methods of use: backpack or trolley mode. Flexible shock-absorbent structure. Front and side pockets for documents and PPE (helmet, gloves, mat and rod).

Cost-efficient and well-proven electrical safety tools for AIS substations, GIS substations, overhead lines, substation services

Ergonomic straps and foam padded back. Silent rubber wheels, replaceable. Extremely comfortable to use. Reflective stripes. For measuring equipment. Pockets for laptop, documents and 3 rigid trays with adjustable height. Detachable rolling base (MO 101) and quick assembly on the bag. For electric tools: vertical tray for arranging electrical safety tools in several slots. Central pocket for large electrical safety tools. Fixed rolling base. Blue. Accessory: pocket with transparent cover for quickly viewing the contents. Flat tool case: made of high-resistance textile Carry handle. Elastic straps for holding electrical safety tools on the two interior surfaces. Reversible and removable tool-holder tray. Electrical safety tools bag: Made of split grain leather, black. Carry handle. 1 hold-all pocket, 1 separation forming a tool-holder tray and 1 tool-holder flap. Closed using 2 straps with loops. Riveted assembly and reinforced bottom. Tool bag: made of full grain leather, natural colour. Transport handle and adjustable shoulder strap. 2 interior pockets separated by a tool-holder tray Closed using 3 straps with loops. Reinforced bottom. Sewn bag assembly. Roll bag for PPE: Large capacity for storing PPE (gloves, helmet, carpet, boots and other accessories). Adjustable carry straps. Double-zip closing. Exterior transparent pocket. Stability and direct access to contents. Arranging the tools and PPE. Adjustable arrangement. Ergonomic straps. Storage for protective helmet. Storage for laptop. Pocket. Insulated hand tool, hybrid hand tools, loosen screws, nuts, bolts. This prevent damage to the bolt head and nut.

Electrical safety tools for power transmission and distribution

Low Voltage LV Live working electrical safety tools: The new range of bimaterial insulated electrical safety tools for live working up to 1 000 Volts according to IEC 60900 standard. Each tool is controlled and tested to 10 000 volts. This ensured by strict quality control procedures. Complete range of insulated electrical safety tools for live working up to 1 000 Volts according to IEC 60900 standard. This ensured by strict quality control procedures. Maximum voltage use: 1000 V. Aluminium casting plier. To strip LV twisted cables. Aluminium casting plier. To strip LV cables. Chrome vanadium steel. Burnished head. Stainless steel blades. Softgrip handles. Adjustable screw joint. Non insulated tool Capacity: 8 to 54 Nm (ibF Ft: 5-40). Linear graduation, english and french scales (ibF Ft and Nm). Tolerance: 4%. For intervention works, strong waterproof, canvas reinforced bottom, large capacity of storage, shoulder strap. Black grained leather with handle. The interior includes: a pocket, a separation which forms a tool tray and a fold-down tool tray. For the most common operations, we propose all types of kits hand electrical safety tools. Insulated electrical safety tools must comply with the NF EN 60900 and IEC 60900 standards. To meet these standards, insulated electrical safety tools undergo 10 000 volts through electrical testing and many mechanical tests, including impact tests, tearing tests, and puncture tests. For working live at nominal voltage up to 1000 V AC and 1500 V DC. Insulated electrical safety tools. Products suitable for work on live cables, particularly low voltage (30 cm area of a live bare wire). Ergonomic. Dual material with injected material for operator comfort. Dielectric Test Indentation Flame retardancy Impact Test Test for adhesion of the insulating materiel Extensive product line for work on live cables; mainly used by LV Live Line Working teams. Ergonomic. Dual-layer with a white insulating layer. High mechanical strength in the layers due to dipping technique. Steel with high mechanical properties. Chrome – molybdenum vanadium steel blade. Dual material handle. Anti-slip material. Chrome-vanadium steel. Dual material handle. Chrome – molybdenum vanadium steel blade. Special steel, oil-hardened. Burnished head. Chrome-vanadium steel. Chrome-vanadium steel for pin terminals 2.8/5/6.35 mm. Composite insulation. Entirely insulating. Treated forged steel blade. Protected hard forged steel. Two blade positions. Flush and 90° cutting supplied. Tension blade by screw. Special steel, oil-hardened. Special steel insulated inserts using one-piece injection.

Electrical safety tools portfolio for power transmission and distribution systems

Screw tightening kit: tightening tool kit for screw with BTR head BTR. Ssix sides of 4. Suitable particularly for identically tightening connection circuit breakers, meters and various kits used by the ERDF for the equipment of the control panels. Electrical tool bag: Foamed structure and reinforced base. Adjustable shoulder strap. 8 outside pockets. Interior: mesh pocket and removable tool holder. 4 outside pockets and large compartment inside. Transport handles. Backpack for electrical safety tools: Semi-rigid and foamed structure. Reinforced handle. 4 exterior pockets. Velcro and straps for storage for insulating mat. Interior: pocket for a laptop, pockets, detachable reversible tray and elastic straps for electrical safety tools. Support pads and reinforced bottom. Delivered without electrical safety tools. Electrical safety tools box: Flexible and detachable protective flap for direct access to electrical safety tools. Metal up-and-over handle, with foam padding. 8 exterior pockets, including one adjustable pocket for a saw and 10 vertical internal pockets. Adjustable shoulder strap. Support pads and reinforced bottom. Delivered with tools. 2 methods of use: backpack or trolley mode. Flexible shock-absorbent structure. Front and side pockets for documents and PPE (helmet, gloves, mat and rod).

Cost-efficient and well-proven electrical safety tools for AIS substations, GIS substations, overhead lines, substation services

Ergonomic straps and foam padded back. Silent rubber wheels, replaceable. Extremely comfortable to use. Reflective stripes. For measuring equipment. Pockets for laptop, documents and 3 rigid trays with adjustable height. Detachable rolling base (MO 101) and quick assembly on the bag. For electric tools: vertical tray for arranging electrical safety tools in several slots. Central pocket for large electrical safety tools. Fixed rolling base. Blue. Accessory: pocket with transparent cover for quickly viewing the contents. Flat tool case: made of high-resistance textile Carry handle. Elastic straps for holding electrical safety tools on the two interior surfaces. Reversible and removable tool-holder tray. Electrical safety tools bag: Made of split grain leather, black. Carry handle. 1 hold-all pocket, 1 separation forming a tool-holder tray and 1 tool-holder flap. Closed using 2 straps with loops. Riveted assembly and reinforced bottom. Tool bag: made of full grain leather, natural colour. Transport handle and adjustable shoulder strap. 2 interior pockets separated by a tool-holder tray Closed using 3 straps with loops. Reinforced bottom. Sewn bag assembly. Roll bag for PPE: Large capacity for storing PPE (gloves, helmet, carpet, boots and other accessories). Adjustable carry straps. Double-zip closing. Exterior transparent pocket. Stability and direct access to contents. Arranging the tools and PPE. Adjustable arrangement. Ergonomic straps. Storage for protective helmet. Storage for laptop. Pocket. Insulated hand tool, hybrid hand tools, loosen screws, nuts, bolts. This prevent damage to the bolt head and nut.